It is unclear whether there actually is any usecase for this option
which isn't better served by sub-ass-use-video-data and/or LayoutRes
overrides, but prior to the introduction of sub-ass-use-video-data
it was possible to pass along storage resolution while faking an
aspect ratio of 1:1.
sub-ass-video-aspect-override=1 combined with sub-ass-use-video-data=all
now makes this possible again.
The uper limit of a 10:1 aspect matches
the general video-aspect-override option.
The naming for "blur-compat" was misleading since the setting
actually affects more than just blur affects. Additionally
forwarding storage resolution but forcing an aspect ratio
of 1.0 for the video is likely to result in odd rendering
and there’s no known usecase for it.
Both options control which video properties are exposed to libass
so to fix the aforementioned issues merge these settings into one
tri-state sub-ass-use-video-data.
The default V keybind now cycles through all states of
use-video-data instead of toggling vsfilter-aspect-compat.
Resolves: https://github.com/mpv-player/mpv/issues/10680
player/main.c runs all option callbacks with a flag on init, so since
a5937ac7e3 which added UPDATE_VO, if --force-window=yes is passed, the
VO is immediately initialized, as if --force-window=immediate was
passed. Fix this by not running the UPDATE_VO code when there is no
video output.
Follow up to the previous commit. Stop decreasing --ab-loop-count=N on
each iteration so it is preserved across different loops. In particular
it is preserved between different files without adding it to
--reset-on-next-file. Add a property to expose the remaning A-B loop
count instead.
The current behavior of --ab-loop-count=N is even worse than --loop-file
since it also doesn't reset when defining a new A-B loop in the same
file. Defining it has no effect after --ab-loop-count has decreased to
0, and this can't be fixed by adding it to --reset-on-next-file. This
commit also resets remaining-ab-loops every time --ab-loop-a and
--ab-loop-b are set to fix this.
This will allow reiniting the VO when more options are changed without
hardcoding them in options.c
Also reinit the VO when changing --gpu-debug and --gpu-sw.
These have been deprecated for 9 years so it's fine to remove them.
Using the replacement properties like video-bitrate in stats.lua will
convert big enough bitrates to Mbps.
option-info/<name>/default-value would be initialized with zeroed
object, which is not valid for string typed options, as the would be set
to NULL.
Found by OSS-Fuzz.
tag_property() expect metadata to not be NULL on M_PROPERTY_KEY_ACTION.
M_PROPERTY_GET_TYPE can be skipped only if key is not queried.
Fixes: a05b847879
This follows up 96e1f1dfa5 which converted --gpu-context, and has the
same advantages as listed there.
Unlike with --gpu-context auto can be used anywhere in the list, e.g.
--gpu-api=d3d11,auto works.
I wanted to use the list of GPU contexts as the description in
get_type_desc(), but there is no talloc context to allocate it to, so I
set a print_help_list to print them. The APIs go before the contexts so
that etc/_mpv.zsh doesn't try to complete the contexts.
Previously, using m_option_type_alias required that the alias have the
full name of the option value. This is limited if you are reusing the
same opts struct in different sub options. Fix this by add an additional
field to m_option to signal whether or not prefixes should be taken into
account for the alias option. Instead of blindly using whatever is
stored in opt->priv as the name, we can construct the desired option
name for either case (using the prefix or not).
It fixes stack-overflow with keys that contains hundreds of splits. 100
is more than enough for any valid use of user-data, normally key
shouldn't contain more than a few splits.
Found by OSS-Fuzz.
Since 7fc4bac29f182cab1823221ed580423594041fc1, playback-time and
time-pos will now always have exactly the same values. Both properties
are commonly used, so just make playback-time an alias for
time-pos and document it.
Allow configuring whether to print the media-title, the filename or both
(as `<title> (<filename>)`) in show-text ${playlist}, the OSC playlist
and in the playlist selector.
Showing only titles hides information when files are badly tagged, or
when it hides the track numbers of album songs. But showing filenames is
not as useful as titles e.g. when playing URLs with media titles. This
option lets the user choose which one to show, or show both if switching
is inconvenient.
The OSC's playlist_media_title script-opt is removed because this option
is better since it works everywhere after configuring it once.
Closes#11653.
Also show the full URLs of playlist entries instead of their basenames
in osc.lua and select.lua, consistently with mp_property_playlist().
For simplicity, this just checks if entries contain :// instead of
replicating all of mp_is_url().
Co-authored-by: Kacper Michajłow <[email protected]>
The problem with using get_current_time is that it can return negative
values. Interally in mpv, we need this but for some spots negative
values are not great. Since the previous commit enforced nonnegative
returns for get_playback_time, we can use that instead. The two areas
changed here are watch later configfile writing (clearly should always
be a positive number) and the time-pos property (negative numbers are
nonsense for users). This fully fixes#10346.
In various edge cases, this causes an assertion that was added later in
8816e1117e to be hit. The actual purpose
of the special case is not really clear. mp_seek already will change the
mpctx->stop_play value, so there shouldn't be any need to do it in
queue_seek. And it is known to cause problems so revert it. Also, remove
the special play direction logic that works around this behavior.
Fixes#13778.
This reverts commit dbdc46c97a.
This adds non-mpv filters to option-info/af/choices and
option-info/vf/choices, which allows completing them with set af/vf
<Tab> in console.lua.
Partial fix of #13017. Getting the filter options would required adding
af-list and vf-list properties.
This adds touch-pos property, which contains the information of all
current touch points. The property has sub properties:
touch-pos/count: the number of current touch points
touch-pos/N/x,y: the position of touch point N
touch-pos/N/id: unique identifier of the touch point
Since the list of available GPU contexts is a compile time constant,
use obj_settings_list instead of opt_string_validate for GPU contexts.
This has several advantages:
- Aligns with the existing usage of vo, ao, and filter lists.
- Allows custom probing order.
- Allows list option suffixes. (--gpu-context-append, etc.)
- Allows autocomplete in console.lua.
- Uses the standard obj_settings_list help printing, so the custom
help printing function is no longer needed.
This also deduplicates some context creation code for ra_ctx_create
and ra_ctx_create_by_name.
This gives these properties the "time" type, which allows them to be pretty-printed as HH:MM:SS easily (but also still allows raw formatting using e.g. ${=sub-start}).
Turns out that adding more medatata like HDR10+ and Dolby Vision would
produce a lot of duplication and it is better to centralize it around
the track-list property.
Fixes: e720159f72
Adds support for extracting codec profile. Old properties are redirected
to new one and removed from docs. Likely will stay like that forever as
there is no reason to remove them.
As a effect of unification of properties between audio and video,
video-codec will now print codec (format) descriptive name, not decoder
long name as it were before. In practice this change fixes what docs
says. If you really need decoder name, use the `track-list/N/decoder-desc`.
When converting a list to string for show-text, since
05c398fb6c the OSD_ASS_0 escape hatch
is used. This usage is problematic because the same format string is
used for print-text, which results in these ASS escape sequences
being printed in the terminal.
Also since d6610a5b2f, the print-text
output to console.lua is no longer escaped if OSD_ASS_0 is present.
This results in abnormally formated text in the console output.
Fix this by not using ASS escape sequences for this. Instead, use the
circle symbols used by the OSC, which also results in the same width
for active and inactive items.
Would be better to search the other way around, because options list is
bigger than property list, but with minimal changes this is good enough.
Both are relatively small tho and the only reason for this micro
optimization is to increase the fuzzing throughput.
Basically a simple way to perform any command/property action from the
command line. This takes the exact same syntax as input.conf but not
including the key naturally. Potentially useful for weird properties
that don't map well to options (like ao-volume). Fixes#12353.
This enhancement makes it easier to create constant width property
expansions, useful for the `--term-status-msg`. Additionally, it changes
to `%f` printing with manual zero trimming, which is easier to control
than `%g`. With this method, we can directly specify precision, not just
significant numbers. This approach also avoids overly high precision for
values less than 1, which is not necessary for a generic floating-point
print function.
A new print helper function is added, which can be used with adjusted
precision for specific cases where a different default is needed. This
also unifies the code slightly.
This adds a command to escape ASS tags to remove code duplication
between sub/osd_libass.c, console.lua, osc.lua, stats.lua and any user
script that calls mp.create_osd_overlay().
A command is used instead of scripting functions so that all clients can
use this and not just use Lua and JS ones.
osd_mangle_ass() also interprets osd-sym-cc and osd-ass-cc/{0,1}, but
since they use invalid UTF-8 characters there is no risk of escape-ass
users using them by accident, like with any OSD message.
Always replacing \n with \\N in mangle_ass() even when it is not called
by escape-ass doesn't seem to cause any issue, but I made it conditional
anyway to avoid changing how all OSD messages are treated unnecessarily.
There was no way for scripts to know the current size of the terminal,
which is essintial if they want to provide a good user experience even
without a window.