Add adaptor for arrays of properties, this is not used as real option,
as those are always string list. But as a connector struct for creating
typed node arrays, in (sub)_properties.
This incorrectly used clamp_double function after 0e7f9c39dc when it
should've always used clamp_float instead. Use clamp_float instead
Fixes: 0e7f9c39dc ("m_option: correctly clamp OPT_FLOAT values")
Unfortunately we don't have control over libplacebo and cannot
synchronize such changes, so just return `<unknown>` to be forward
compatible with any possible changed.
Note that this should be updated ASAP to support new values.
It would be nice to expand all path arguments for free in the option
code, but life isn't so simple. Because of string list options, we have
to expand at parsing time. Because of libmpv, mpv_global has to be
passed around a million places. Even after doing all that, there's still
a drawback where anything defined in builtin.conf (used for setting
default profiles and such) will be unable to correctly resolve paths if
the user uses --config-dir. Nothing currently defined in builtin.conf
would be subject to that and it's not likely that anyone would add
anything that would be, but it's a limitation that can't be changed
because this has to be parsed before the user's command line and before
mpv_global is set. There's also another problem of pretty printing paths
which are now always full paths instead of relative ones. It's not so
nice if the user's home path is something very long. This could be dealt
with by saving an unexpanded path in some field in the opt somewhere and
then doing that for pretty printing but with all this extra
complication, it's questionable if there's really any net gain at the
end of the day. Calling mp_get_user_path on some opt->whatever is a lot
simpler and always works. So this commit goes back to the old model
along with the following reverts/reapplies.
This reverts commit 9b7374ea40.
Unfortunately, I've already done most of the legwork on expanding paths
manually in the code everytime we encounter one of these options, but it
is completely possible to do it during the option parsing/copying. All
option value setting should go through m_config_set_option_raw at some
point, so this is a good target place to put this logic. Additionally,
the M_OPT_FILE flag already exists for any option that is meant to be
have path values as arguments, so we just needed to add an m_option
method to do this. Fundamentally, this is exactly the same as
m_option_copy except that we potentially expand the value string. A new
expand function pointer is now added and we implement it for the two
option types where this is relevant: OPT_STRING and OPT_PATHLIST.
Furthermore, a m_option_copy_and_expand wrapper is added to handle which
function pointer should be used. With this change, this means that all
path values located in any opt->value pointer should automatically be
expanded and users of the value no longer have to manually do this
themselves. Of course, that means that there's now a ton of redundancy
in the code that can be eliminated. That will be cleaned up in the next
commits.
This code got shuffled around over the years but fundamentally it was
first introduced in 2c22fcd350 to fix a
parsing issue with specifically the af and vf options. Syntax like af*
and vf* used to be valid and this was part of dealing with that case.
Later 50008adf4a completely changed this
and ripped out support for the wildcard behavior. But these few lines to
deal with the special case were never removed. The token splitting has
been unnecessary for years and is confusing, so clean this up and
finally remove it.
It's easier for potential callers of this to convert char to bstr than
vice versa. Internally, the function uses bstr anyway so just eliminate
the conversion and let callers do it. The next commit will add another
caller of this where the bstr param is preferable.
Most users of this function doesn't expect it to return NULL, with
exception of Stereo-3D video mode. Which is a list directly linked to
Matroska specification, and used as value check in demux_mkv and also
when printing format.
There already was a MP_STEREO3D_NAME_DEF macro, so just promote this to
more generic function.
Fixes assert on invalid value found by OSS-Fuzz.
Fixes double evaluation in MP_STEREO3D_NAME_DEF macro.
When converting list options to strings and the value is empty, an
empty string is returned. This is true for key value list and object
settings list options. However, for string list options, there is an
edge case: if the list exists but has no element (which can happen
when using change-list command), it behaves as if the property does
not exist and returns "(error)". This causes confusing messages when
toggling glsl-shaders at runtime and seeing "(error)" printed as the
value when all shaders are toggled off, for example.
8461143ed7 attempted to fix it, which
fixed the case for unset string list, but not for a list with no
element.
Fix this by making sure an empty string is returned in this case.
The relative time chapter is 1-based even though it stores
0-based values internally, but the printing doesn't consider
that and gives 0-based value.
Change it to use the same base as setting the value so that it prints
the same value as being set.
Fixes: 877775f84e
This adds --video-aspect-method=ignore to replace --video-aspect-override=0.
--video-aspect-override=0 and --video-aspect-override=-1 will no longer be
handled specially. For compatibility, 0 is mapped to always use ignore
and -1 is always mapped to always use container.
"no" is now the replacement for --video-aspect-override=-1, which is
internally remapped to -2 to avoid using a deprecated value.
This is poorly implemented and will break existing scripts which set
the value directly with double without a string value, like
mp.set_property_native, or if the value is set with add/multiply commands.
Revert this until a better solution is found.
This reverts commit cb91de2a34.
It's unfortunate that it is implemented this way since changing it will
take time. This option should *really* be like OPT_CHOICE but with
doubles and not integers. We don't have that though and implementing it
is something for the future. Even if that was done today, this still
couldn't be switched to since setting -1 has been the effective way for
years to undo video-aspect stuff. So the approach is to just add another
special keyword for this and tell people to use that instead. Note that
setting 0 isn't deprecated since M_RANGE(0, 10) is totally fine and
would work in the future if this option type ever gets redone.
Setting this to M_RANGE(-1, 10) meant that you could pass fractional
negative values without it being an error. This is, of course, nonsense.
-1 is the only special negative value with a meaning. Error out if we
get anything else by doing some additional parsing before we send it off
to parse_double which will then restrict the range to 0, 10 with these
changes. Note that this approach requires defval to be there which is
not the most extensible thing in the world. But there's literally only
two OPT_ASPECT type options out of the hundreds we have so not a big
deal. Ideally, this type should be OPT_CHOICE but with underlying
doubles but that's too much effort to implement cleanly.
While parsing through the separators, the OP_APPEND also needs to use 0
for the separator since it is supposed to be unescaped. This was missed
in the code reorganization of d2c409c56b.
Keyvalue lists were unaffected because only OP_DELETE and OP_REMOVE use
this code.
b56e63e2a9 removed this because it was
deprecated and not clearly useful. This commit adds this operation back
to string lists and keyvalue lists, but with one important change. It
operates via the actual values and not indexes. So you can use
--foo-del=bar,bar2 to remove bar and bar2 from foo. The difference from
using -remove is that this is subject to escaping rules and has the same
caveats as -add. Note that -del wasn't added back to the object settings
list because you can already remove multiple items with -remove from it.
Done with 4a084c0df8. The reasoning was
that it was "confusing", but without using -add it is impossible to
append multiple items to a list in a single command and just overall
makes this less powerful. The code works fine. You might find yourself
in escaping hell, but that's on the user to deal with.
Also it's worth noting that -remove with object settings lists can
actually remove multiple items and unlike the other list option types.
FLT_MIN is a small positive number (1.175494e-38), so the check v <
FLT_MIN introduced in 0e7f9c39dc made all 0 and negative float option
values error, e.g. panscan=0 or video-align-y=-1.
Fixes 0e7f9c39dc, fixes#15728.
OPT_FLOAT values currently reuses OPT_DOUBLE handling, but if a
finite double value is produced which is out of the float range,
it results in UB.
If the floating point implementation is IEEE-754, then the value is
converted to infinity and stored in the float. However, this still
does not work as intended, as infinity is rejected for OPT_DOUBLE
unless infinity is explicitly specified as the min/max range.
Fix this by adding another clamping stage after operating the values
as double. Finite double values are clamped between FLT_MIN and
FLT_MAX, and out of range error is signaled when suitable.
Elements are not parented to the add list, as they are directly copied
to the target list. Therefore, we need to clean them up manually.
Fixes: 1f5a67d8fa
c4e8c36071 made any usage of --geometry
implicitly center the window on the screen after a resize even if the
user did not pass any x/y arguments to the option. At the time, this was
probably wanted since --geometry was primarily a startup option and
likely the window wouldn't be centered on x11 without moving
coordinates. Times have changed since then and we support full runtime
--geometry changes on all the relevant platforms but it comes with this
automatic window centering behavior (except on wayland of course hah).
It's better to make such window centering optional and user controllable
since it is entirely reasonable that someone wants --geometry=50% to
just resize and not move anything. It's already trivial for a person
that does want to move the window to just add their coordinates to the
--geometry command so there's no reason to continue to force this
behavior since it is less flexible.
Instead, move the window centering stuff out of m_geometry_apply into
vo_calc_window_geometry. We give the power to the caller to whether or
not to force centering the window here and all usage of the function is
updated to simply call it with false for now. Additionally,
--force-window-position being set will also center the window like
before. All that is left is for the windowing code to take advantage of
this. See subsequent commits.
It makes sense to allow the first part of the list. There are
warnings about excessive elements already. This also allows overriding
elements with the same label.
Limit list entries to 100. obj_settings_list is not designed to hold
more items, and it quickly starts taking ages to add all items. 100 is
more than enough.
Fixes 30s timeout on OSS-Fuzz and generally fixes possible DoS on mpv.
This option type is not used only by filter options: they're already
used by --ao, --vo, and --gpu-context. Replace the mentions of
"filter" to "item" instead, and changes some languages to improve clarity.
Also change the documentation on "Filter options" to describe what it
really is, and fix a typo.
Kacper Michajłow